Kentrox AAC-2TM Switch User Manual


 
9
AAC-3
®
, AAC-2
and CellSMART
®
www.kentrox.com
800.733.5511
Ordering Information
Description Catalog Number
Chassis and Power Supplies
AAC-3 Eight Slot Chassis 10000
AAC-3 DC Power Supply 10101
AAC-3 AC 120 Volt Power Supply 10100
AAC-3 AC 240 Volt Power Supply 10102
AAC-3 AC 120/240 Volt Power Supply 10103
AAC-2 Four Slot Chassis 10001
AAC-2 DC Power Supply 10111
AAC-2 AC 120 Volt Power Supply 10110
AAC-2 AC 240 Volt Power Supply 10112
AAC-2 AC 120/240 Volt Power Supply 10113
Common Modules
AAC Alarm Module 10011
AAC Service Data Module (SDM) 10013
AAC Integrated System Controller with 3.2.0 software 10022-320
Protocol Modules
AAC Cell Protocol Module 10200
AAC Packet Protocol Module 10201
AAC Quad Cell Protocol Module 10202
AAC Quad Packet / CBR Protocol Module 10203
AAC Enhanced Shaping Cell Protocol Module 10204
AAC Quad Packet Protocol Module 10205
AAC Quad Ethernet Protocol Module 10206
AAC Octal CES/CBR Protocol Module 10207
Select Physical Layer Modules (continued)
DS3 AND E3 PHYSICAL LAYER MODULES
Interface connector: 75 ohm coaxial BNC
Line rate: DS3 - 44.736 Mbps
E3 - 34.386 Mbps
OC-3C/STM1 SINGLE AND MULTI-MODE PHYSICAL LAYER MODULES
Interface connector: Duplex SC
Line speed: 155.52 Mbps
Wavelength: 1310 nm (single-mode or multi-mode)
QUAD ETHERNET PHYSICAL LAYER MODULE
Data rates: 10 Mbps (per port) half duplex
Number of ports: 4
Interface connectors: RJ4