Kenwood DDX790 Computer Monitor User Manual


 
English 35
Using the Replay function
You can temporarily record the broadcast
from the current time, and replay the
recorded data.
When the recording capacity is full,
the older recorded data is deleted and
recording continues.
If you change to another channel during
playback, the recorded content will be lost.
Entering the Replay mode
Progress bar Playback status
(3: play / 8: pause )
Time code
Progress
bar
Shows the remaining capacity
(gray) and the amount of
recorded data (blue). If you
have already recorded fully,
the entire bar is indicated in
blue.
Updated every second.
Time code Shows you the point of Replay
you are listening to.
Example: –5:00
You are listening to the data
of 5 minutes before the
current broadcast.
Updated every second.
[4] Returns to the previous
track if pressed within
2 seconds from the
beginning of the current
track.
Returns to the beginning of
the current track if pressed
after 2 seconds or more
of the track have been
replayed.
[1] [¡] Rewind/Fast forward
[38] Starts/Pauses playback.
[¢] Skips the current track.
Exiting the Replay mode (Returning to
the channel reception screen)
EN_GET0907-001A_KR.indb 35 12/11/13 10:13