Knoll Systems DC-7BT Laptop Docking Station User Manual

Knoll Systems warrants the DC-7BT sold in the USA and Canada by authorized
Knoll dealers to be free of defects in materials and workmanship. This warranty
extends for one year from the date of purchase by the original consumer. Any
products returned to Knoll Systems and found to be defective by Knoll Systems
within the warranty period will be repaired or replaced at Knoll Systems option,
at no charge. Knoll Systems will not be responsible for the actual cost of
installation or removal of the product, nor for any incidental or consequential
damages. Some states do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitation may not apply to you. This
warranty gives you specific legal rights. In the USA, you may have additional
legal rights that vary from state-to-state.
Your DC-7BT Bluetooth Dock requires full concentration and both
hands to install.
Do not use this apparatus near water (for example a bathtub, wash
bowl, kitchen sink, laundry tub, wet basement, swimming pool, or
other areas located near water).
Clean only with dry cloth. Unplug this product from the wall outlet
before cleaning.
Do not install near any heat sources such as stoves or other apparatus
(including amplifiers) that produce heat.
Protect the power cord from being walked on or pinched, particularly
at the plugs, convenience receptacles, and the point where they exit
the apparatus.
Only use attachments/accessories specified by the manufacturer.
Unplug this apparatus when unused for long periods.
The manufacturer does not assume any responsibility for personal
injury or property damage incur
red due to its interaction with the DC-7BT Bluetooth Music Receiver
and sources (iPhone iPod etc.).
Knoll Systems
145 Tyee Drive Point Roberts, WA 98281, USA
14-7163 Vantage Way, Delta BC V4G 1N1, Canada
Tel: (604) 940-1689, Fax (855) 734-3363
Made in China
Printed in Canada
Wireless Docking Station
Installation and Operating Instructions v1.1
The Knoll DC-7BT is a docking station that wirelessly connects to any
Bluetooth enabled source device (such as an iPod, iPad, most cell
phones, notebooks, etc.). It allows the source music or audio to be
played back wirelessly through your home amplifier and speakers.
A DC-7BT key feature is the ability to keep your Bluetooth enabled
source device next to you at all times, so you know what is playing
and can easily make changes without have to move to the docking
Full 20-20 kHz response with proprietary digital to analog
conversion firmware
Tiny, fits almost anywhere near your stereo. 1.8” x 1.75” x
0.8” high (46 x 45 x 20 mm)
Very simple operation with no pairing and no power button
Gold 3.5mm to RCA stereo cable and 3.5mm to 3.5mm stereo
cable included.
Power adaptor works with 100 VAC to 240 VAC 50-60 Hz
Connecting to your home
Amplifier or Receiver and
The DC-7BT Bluetooth Dock provides a
fixed level (line level) output, which
means that it needs to be connected to
an amplifier or powered speaker that
has a volume control. Some, but not all,
Bluetooth enabled devices (cell phone,
laptop, etc.) have the ability to adjust
the volume built into them.
Select which included cable will be used with this installation. Connect
the 3.5mm stereo mini plug to the DC-7BT rear panel jack. Connect
the two RCA plugs or the other end of the 3.5mm cable to the AUX in
or other input (but not phono) plugs usually found on the rear of the
amplifier or receiver.