Filter
Top Products
1 www.kodak.com/go/aiosupport
1
Choosing a Connection Type
Make sure you completed the steps in the Start Here Guide. Then choose one of the following connection
types for your printer, and see the corresponding chapter for instructions.
NOTE:
• You can change your connection type later. See the chapter
Configuring Your Printer in the
Extended User Guide.
• For additional networking information or troubleshooting, go to
www.kodak.com/go/inkjetnetworking.
Wireless (Wi-Fi) connection
Ethernet connection
To connect your printer to a wireless network, see Setting Up the Wireless (Wi-Fi)
Connection, page 2.
To connect your printer to a wired network using an Ethernet cable, see Setting Up the
Ethernet Connection, page 4.
MS SD/HC MMC
Rotate
Back
Home
urg_01108.book Page 1 Thursday, October 22, 2009 7:41 PM