Filter
Top Products
MECHANISM FRAME and LENS MOUNT
1. Remove the UPPER HOUSING. See page 4-1.
2. Remove the CENTER HOUSING. See page 4-4.
3. Remove the 4 SCREWS and the TRANSFORMER. See page 4-11.
4. Remove the SCREW and disconnect the NEUTRAL WIRE.
5. For Model 5020, 9020 and 9020/CINE remove the SCREW, the AF PCB and the 2 CONNECTORS from
the AF PCB.
6. Lift the MECHANISM FRAME and LENS MOUNT and remove the 3 CONNECTORS J 3, J 10, J 12.
See page 4-19.
SCREW
LENS MOUNT
MECHANISM
FRAME
SCREW (4)
TRANSFORMER
NEUTRAL WIRE
AF PCB
figure 4-17
Service Manual SM2547-1
03/98 4-12 Kodak AG, Stuttgart