Filter
Top Products
Using the KODAK Negative Film Processing Cartridges FC1 and FC2 • CIS-254 3
Bleach Tank (N2)
Use KODAK Negative Film FC Tank Bleach,
CAT No. 107 2024. Each kit makes 3.6 litres of tank
bleach solution. One kit is required to prepare the bleach
tank in either the FP363SC processor or the FP563SC
processor. Add the contents of 1 bottle to the empty
bleach (N2) tank. Position the tank level gauge on the
bleach (N2) tank rack, and add water to the N2 level mark
on the gauge. For faster warm-up, use water close to
operating temperature (31 to 41˚C [88 to 106˚F]).
Fixer Tanks (N3-1 & N3-2)
Use KODAK Negative Film FC Tank Fixer,
CAT No. 813 4421. Each kit makes 3.6 litres of tank fixer
solution. One kit is required to prepare each fixer tank in
either the FP363SC processor or the FP563SC processor
(two tanks per machine). Add the contents of 1 bottle to
each empty tank (N3-1 and/or N3-2). Position the tank
level gauge on the fix tank rack (N3-1 or N3-2), and add
water to the N3-1 or N3-2 level mark on the gauge. For
faster warm up, use water close to operating temperature
(31 to 41˚C [88 to 106˚F]).
Stabilizer/Final Rinse Tanks (N4-1, N4-2, N4-3)
Use KODAK Negative Film FC Tank Rinse,
CAT No. 872 4791. The kit contains three bottles of
concentrate. Each bottle will make 1.9 litres of rinse tank
solution. One bottle is required to make a rinse tank
solution in each rinse tank of the FP363SC processor or
the FP563SC processor (three tanks per machine). Add
the contents of one bottle to each empty tank (N4-1, N4-2,
N4-3). Position the tank level gauge on the rinse tank
rack, and add water to the N4-1, N4-2 or N4-3 level mark
on the gauge (depending on which tank is being mixed.).
For faster warm up, use water close to operating
temperature (31 to 41˚C [88 to 106˚F]).
Water Reservoir
Use KODAK Rinse Tablets, CAT No. 191 3110. Add
tablet(s) into the loading port on top of the reservoir
before adding water. Use one tablet for every 4 litres of
water.
Figure 1
30 (27)7.5 (6.75)5 (4.5)
1
Replenisher
Negative Film
Rinse
N4-R
Negative Film
Replenisher
Developer
N1-RB
Negative Film
Fixer
Replenisher
N3-R
Negative Film
Developer
Replenisher
N1-RA
Replenisher to specification.
Rinse
N4-3
The N4-2 Rinse is pumped into the N3-2 Fixer Tank to dilute the Fixer
1
Temperature
C ( F)
Time
min:sec
Replenishment
Rate
mL/135-24 roll
(mL/M)
RinseDeveloper FixerBleach Fixer Rinse
Dry
15 (13.5)
Negative Film
Bleach
Replenisher
N2-R
N1 N2 N3-1 N3-2 N4-1 N4-2
1
0:70
to
0:70
to
0:70
to
3:05 0:50
0:20
38.0 0.2
+
_
+
_
0:50
0:50 0:30
0:20
(100.4
0.4)
35 - 41 (95 - 106)
Cartridge Chemistry
CN-16S
Process Cycle with
KODAK Negative Film
FC1 Cartridge
FC2 Cartridge