Installing the KODAK OMS Imaging Software
4 Installing KODAK OMS Imaging Software
Installing the KODAK OMS Imaging Software
To install the Kodak OMS imaging software for the first time, follow these procedures:
• Install the software on the image server.
• Register the software on the image server.
• Install the software on each workstation.
• Connect and install any imaging hardware.
Installing the Software on the Image Server
To install the Kodak OMS imaging software on your image server, follow these steps:
1. Exit any applications running on this computer.
2. Insert the software DVD in the DVD-ROM drive on the image server. The
KODAK OMS
Imaging
install menu is displayed.
Figure 2 KODAK OMS Imaging Install Menu Window
3. Select Install OMS Imaging Software. If you are using the DR software, select Install
Imaging Software
. The Installation Type window is displayed.
If upgrading a previous
software installation,
see Upgrading the
KODAK OMS Imaging
Software on page 7.
Before performing a
server installation on
a computer with the
Vista operating
system, contact
technical support for
assistance.
If you are installing the
software using a cd,
insert the cd into the
CD-ROM drive.
When installing the
software on the Microsoft
Vista operating system,
one or more system
security alerts are
displayed. Click Allow to
enable the installation
process.
