Kodak Slide Projector Projector User Manual


 
22 KODAK CAROUSEL® Slide Projector
Maintenance
Cleaning the Condenser, Heat-Absorbing Glass, and
Mirror
To clean the condenser, heat-absorbing glass, or mirror, you must disassemble
the lamp module.
Slide the power switch to Off and
unplug the projector. Allow the
projector to cool about 10 minutes.
Push the lamp-module release
button and remove the lamp
module.
Use a torx-head screwdriver to
remove the screw.
Using a flat-blade screwdriver, apply ample
pressure to release each of the metal tabs.
Lift off the top of the lamp module.