Filter
Top Products
Placing
• Place the projection clock onto a level surface.
• Position the projection clock such that the projection lens
q
is directed onto
an empty surface. The distance from the projection lens to the projection
area (ceiling or wall) must lie between 0,4 m and 3 m.
With KH2198: Projection of the time must be directed to an area lying
behind the projection alarm clock. Otherwise, the time will be shown
back to front.
With KH2199: Projection of the time must be directed to an area lying in
front of the projection alarm clock. Otherwise, the time will be shown
back to front.
Operation
Connect the external mains adaptor
This device can be operated with an external mains adaptor.
Please use only mains adaptors that meet these specifications:
Input voltage: 230 V
~
50 Hz
Output voltage: DC 3V (+/- 5%)
Rated current: min. 300 mA
Polarity:
ƽ Attention:
Make certain that the polarity is correct – both for the batteries as well as
for the mains adaptor. Take note of the markings on the 3V direct current
connection
a
.
False polarity will damage the device.
- 8 -
IB_KH2198_99_DT42360_LB6.qxd 17.12.2008 11:32 Uhr Seite 8