Filter
Top Products
- 6 -
Inserting credit cards:
• Open the safety flap over the cutter opening for
CD/Credit cards
e.
• Insert the credit card from above into the middle
of the CD/Credit card cutter opening
e. You
can only shred one credit card at a time. ALWAYS
insert them into the CD/Credit card cutter opening
e with the broad side leading. If you do not, the
magnetic strip will not be destroyed.
Note: Always insert the credit card into the
middle of the cutter opening
e. If you do not,
the shredding process will not start!
Inserting a CD:
• Insert the CD from above into the middle of the
CD/Credit card cutter opening
e. You can only
shred one CD at a time.
ƽ Warning!: NEVER place a finger into the
central hole of a CD when you are feeding it
into the appliance.
Clearing a material blockage:
• Press and hold the switch
w in position should
the item to be shredded become jammed.
The appliance now goes into reverse and the
material to be shredded is returned.
• Place the switch
w into position (OFF) as
soon as the jammed item is returned.
Switching the appliance off:
• To switch the appliance off, move the switch
w
into the middle position (OFF).
Emptying the waste
container
• Empty the waste container t/u regularly.
• Dispose of the waste material in an environmen-
tally responsible manner.
Emptying the large waste container
(Paper)
ƽ Important: Remove the power plug from the
wall socket to avoid an unintended starting of the
appliance.
• Remove the cutter attachment
q from the large
waste container
t.
• Remove the small waste container
u at the front
of the large waste container
t, so that it does
not fall out.
• Empty the large waste container
t and then put
everything back together again.
Emptying the small waste container
(Plastic)
• Remove the small waste container u from the
front of the large waste container
t to empty it.
• Replace it after emptying it.
Notice regarding overheating of the
appliance:
If it overheats, the appliance switches itself off auto-
matically.
ƽ Important: Remove the power plug from the
wall socket to avoid an unintended starting of
the appliance.
• Empty the waste containers
t/u.
• Allow the appliance to cool down.
• Reinsert the power plug into the socket.
• Switch the appliance on, in that the switch
w
is placed in the position .
IB_KH4405_E6002_UK_4.qxd 10.09.2007 9:52 Uhr Seite 6