Konica Minolta 1800767-001A Printer User Manual


 
Solving Other Problems74
Media is
wrinkled.
The media is moist
from humidity or hav-
ing water spilled on it.
Remove the moist media and replace it
with new, dry media.
The media feed roller
or fuser unit is defec-
tive.
Check them for damage. If necessary,
contact Technical Support with the
error information.
Unsupported media
(wrong size, thick
-
ness, type, etc.) is
being used.
Use KONICA MINOLTA-approved
media. See
“Media Specifications” on
page 20 for supported sizes and types.
For a complete list of approved media,
go to www.printer.konicaminolta.com.
Envelopes are being
printed with the lever
on the fuser unit low-
ered.
Before printing envelopes, be sure to
raise the lever on the fuser unit.
Symptom Cause Solution