Filter
Top Products
Placing the Original on the Machine - (continued)
6-7
4. Place the original on the platen glass and press STORE then
press [START].
5. Place the next original on the platen glass and press
[START].
Repeat this procedure until all originals to be sent have been scanned.
The scanned originals are stored in memory.
6. Press STORE to reset the store mode and press [START].
Transmission begins.
Should Memory overflow occur when the original document is being scanned, you have two
options: Transmit the part of the original that has been read (scanned), or redo the proce-
dure from the beginning. If memory overflow happens frequently, install additional memory.
For details, call your service representative.
DETAILS
Simple FAX
Transmission
Placing the Original
on the Machine
Setting Transmission
Conditions
Selecting a
Remote Station
Sc anni ng
Tran smit ti ng
Reserving
Transmission
Manual Transmission
Cancelling
Transmission
Confirming Reserved
Do cum en ts
Confirming
Communication Results
Memo ry
Transmissions
Total Page Set
Timer
Transmission
International
Communica tion
Sender
Information