Filter
Top Products
FAX Terms - (continued)
Appendix-10
M
■ Manual transmission
This operation to send documents while confirming the status of the receiving machine.
■ Memory
The location to store data. It is used to specify the communication or store the document.
■ Memory overflow
The state of the fax image memory in this machine to be full during storing transmitted docu-
ment.
■ Memory Substitute Reception
The function to store transmitted document in the memory automatically when the received
document cannot be printed due to the machine being out of paper.
■ Memory transmission
In this transmission method, all pages being sent are first scanned and stored in memory
before transmission. The document is automatically numbered by total page number, and the
images on the first page are shown on communication results report.
However, when a large number of pages are sent or when the images on the originals are
fine, memory capacity may be exceeded due to the large amount of data stored in memory.
■ Mixed original
The function to set and send document pages of mixed sizes by a single sequence of opera-
tions.
O
■ Original size set
The function to designate the paper size for the document to be sent. Normally, when the
paper size loaded at the remote station is too small to accommodate the image being trans-
mitted, the original image will be reduced to fit the paper size. This feature gives you the
option printing a portion of the image with no reduction.
■ Originating station
The facsimile to provide instruction to send document to multiple stations.