Filter
Top Products
World’s fastest dry imager
(*1)
Through the adoption of new technologies the first
print time has been cut to a mere 50 seconds.
The body has the compactness of a small copier, but
offers the same high performance as our larger
flagship machine. With a throughput of 180 sheets
(mixed sizes) per hour, the DRYPRO 873 dramatically
improves productivity in all your printing work
.
*1:As of August 2008
Five-size print capability and the
world’s smallest design
(*2)
The DRYPRO 873 comes in a less imposing compact
body only 1150 mm in height and boasts a footprint
of just 0.35 m2, while providing five sizes (in
operation 3 sizes at the same time) of printing film
ranging from 14"x17” to 8"x10”.The main film sizes
are supported, enabling the printing of life-size
images.Furthermore,it supports supply units of up to
2 trays + 1 additional tray. Film size can be selected
depending on the purpose.
*2: Installation area as of August 2008
User-friendly,quiet design
The DRYPRO 873 emits remarkably little noise,
contributing to a pleasant working environment.The
running noise has been tuned to the lower tones with
reduced high-frequencies, making the unit sound
deceptively quiet. While overall noise has been
reduced, particular attention has been given to
standby noise, providing quietness in today's filmless
imaging environment, where standby operation
often accounts for most of the usage time.
Total commitment to ease of use
In the DRYPRO 873 we aimed to provide a user-
friendly unit with an intuitive user interface and
simple operation. Status indicators such as 'Film
Empty' are recognizable even from a distance and a
direct button allows tray selection when setting film.
Ease of operation is further enhanced with additional
touches such as simplified film setting requiring
minimal mechanical operation.
DICOM 3.0 support
Supports DICOM PRINT, BASIC GRAY SCALE, and
DICOM STORAGE (SC) and input up to 16 channels.
By adding a backup DICOM imager to the output
destinations, any output is automatically redirected
to the backup destination when a problem occurs
with the main imager. (If an imager in which film of
the same size and type as that of the one in which
the problem occurred is connected.) Data such as
patient ID and patient name can be enlarged and
output to film.By enlarging and printing patient data
on film,you can substantially improve the efficiency
of sorting film.
Designed for 30% energy saving
Dry imagers use heat processing during the imaging
stage. Because Konica-Minolta is committed to
pursuing green technologies, we have successfully
cut electricity consumption by 30% in normal
printing operations (*3), making this a truly eco-
friendly dry imager.
*3: 8 hours/day,printing of 100 sheet
Range of options to suit your needs
Two trays come as standard for film supply, and an
optional third tray can be added. These optional
supply units are available in five sizes (from 14"x17”
to 8"x10”), which can be combined flexibly to suit
your particular needs. A six-channel sorter is also
available for convenience in post-print sorting.
Size, touch, mechanisms… all designed wit h the user in mind
Not just compact…
Not just fast…
A user-friendly design for
confident and easy operation –
A new dimension in laser imagers.