Filter
Top Products
24
1 Hold the slide mount holder so that
the slide slots are to the top and the
frame numbers are up-side-down
and face up.
2 Insert slides into the slots with the
emulsion down.
• When inserting slides, the frame number or
date printed on the slide mount should be face
up.
• Horizontal images should be inserted up-side-
down.
LOADING THE FILM HOLDER
CAUTION
To scan the entire image area, the slides must be
inserted horizontally in the holder, not vertically.
LOADING THE APS ADAPTOR – AD-10 (SOLD SEPARATELY)
APS (Advanced Photo System) cassette film can be scanned with the optional APS adaptor AD-10.
1 Slide the film-chamber release
toward the top of the adaptor
until the film-chamber door
opens.
• The film-chamber release does not
return to its original position until the
film-chamber door is closed.
2 Insert the film cassette into
the film chamber as shown.
• Only load cassettes with the number 4
( ) mark highlighted in white.
3 Close the film-chamber door.
• The film-chamber door will not close if
any other mark other than number 4 is
highlighted. Never force the door shut.
Film-chamber release
Film-chamber door
Scanner contacts
(Do not touch)
Mark
The white mark
indicates the film is
developed.
LOADING THE SLIDE MOUNT HOLDER – SH-U1
• The slide mount holder SH-U1 accommodates up to four slides. Slide mounts must be thicker than
1 mm and thinner than 2 mm to be used in the holder. Do not use glass mounted slides. APS slide
mounts can be used.