Filter
Top Products
23
EASY SCAN UTILITY
2. LOADING THE FILM HOLDER
Using the included holders, the DiMAGE Scan Elite II can scan mounted or unmounted...
• Colour negatives • Colour positives
• Black and white negatives • Black and white positives
APS (Advanced Photo System) film can also be scanned using the optional APS adaptor AD-10.
LOADING THE 35MM FILM HOLDER – FH-U1
The 35mm film holder FH-U1 accommodates film strips with up to six frames.The horizontal images
should be orientated in the same direction as the frame numbers on the film holder.
1 Lift the film cover on the FH-U1 by the
tab near the number six frame.
2 Place the film in the film holder with the
emulsion down.
• If the frame numbers on the edge of the film near the
sprocket holes are reversed, the films emulsion side
is up. Turn the film over.
• Align the film frames with the holder frames.
3 Insert the two tabs on the left side of the
film cover into the holes in the holder
base. Carefully lower the cover tak-
ing care not to move the film.
Snap the film cover closed by
pressing the two “PUSH”
marks.
CAUTION
Remove any dust from the film before placing it in the film holder. Only use brushes or com-
pressed air specifically for photographic film. Do not blow on the film with your mouth, or use tis-
sue paper or your fingers to wipe the film. Always hold the film by the edges.