Filter
Top Products
WHEN USING THE IEEE 1394 CABLE WITH WINDOWS ME
1 Quit the utility software.
2 Confirm the DiMAGE Scan Elite II indicator lamp is on and not blink-
ing.
• If other USB or IEEE devices are connected to the computer, confirm that they are not in
operation before continuing.
3 Double-click on the “Unplug or Eject Hardware” icon on the task bar.
• The unplug-or-eject-hardware dialog box will appear.
4 Select “Minolta DiMAGE Scan Elite 2” and click
“Stop”.
• A confirmation screen will appear.
5 On the confirmation screen, confirm the
device to be stopped. Click “OK” to stop the
device.
6 The “Safe to remove hardware” message
will confirm the operation. Click “OK” to fin-
ish.
7 Disconnect the cable.
• If the scanner is disconnected or turned off without fol-
lowing the above procedure, a message will appear to
indicate that the unsafe removal of device may cause
your computer to crash and lose valuable data. Click
“OK” and then check the image data.
87
APPENDIX