Filter
Top Products
25
EASY SCAN UTILITY
3. INSERTING THE FILM HOLDER
CAUTION
• Do not remove the APS film from the cassette.
• When using the APS adaptor, if the scanner makes a strange sound or the “Film advance error”
warning appears, eject the APS cassette immediately (see page 29), and do not insert it again.
• Minolta is not responsible for any loss or damage caused from the operation of this product.
For information on loading the film holder, see page 23.
CAUTION
Do not open the front door or insert the film holder while the utility software is launching or the
scanner is initialising (the indicator lamp will blink). Insert the holder only after the indicator lamp
glows steadily when initialisation is completed.
INSERTING THE FILM HOLDER FH-U1 OR SLIDE MOUNT
HOLDER SH-U1
1 Open the front door of scanner until the top
of the door lines up with the 35mm mark –
.
2 Hold the film holder or slide mount holder
with the arrow mark face up. Insert the holder
into the scanner until the arrow mark
aligns with the body.
• The scanner will detect the holder and automatically load it
pulling inside slightly.
• To eject the holder, press the eject button.The scanner will
automatically eject the holder to the initial inserting posi-
tion.
• Never touch or hinder the holder while it is in the scanner.
When ejecting the holder, wait until is has come to a com-
plete stop before removing.
• When the scanner is not in use, close the front door
35mm
2
35mm
2
3
35mm
35mm Film Holder FH-U1
Slide Mount Holder SH-U1