Filter
Top Products
4 Changing the Device Setup
16
4.3.1 Setting up the Print Server
Perform the following steps to set up the print server for NetWare
printing.
1. Type up to 26 characters into the
Print Server Name
box for the
print server name.
Only ASCII characters can be typed in. If asterisks (*) appear in
the print server name, non-ASCII characters have been used for
naming the print server.
Normally, you should leave the following items set to their initial
defaults. Change these settings only when absolutely necessary for
some reason.
Print Queue Scan Rate
Type in the interval, in seconds, to specify how often the print
server should check the queue.
Ethernet Frame Type
Specify the Ethernet frame type.