Filter
Top Products
Installing the Auto Document Feeder (ADF)
93
Installing the Auto Document Feeder (ADF)
1
Open the document cover, and
then pull it up to remove it.
2 Insert the pins on the ADF into
the holes at the rear of the
machine.
3 Close the ADF lid.
Adjusting the image position
If the print image is not straight when the ADF is used to scan a document,
use the following procedure to adjust the image position.
1 Press .
2 Press a scroll button until “1. Common Setup” appears
on the display.
3 Press .
4 Press a scroll button until “Adj. ADF Edge” appears on the display.