Filter
Top Products
EM-1 EasyStart
3
Realtime Pattern control:
! Before you continue, turn OFF memory protect: Press GLOBAL
Ä
Hold Shift
Ä
Press step key 16
Ä
Rotate DIAL to “off”
Ä
Press step key 16 again. Press the PATTERN key to return to PATTERN mode.
Copy a preset pattern to a new location:
1. Press PATTERN Ä rotate DIAL to select any pattern Ä press WRITE Ä rotate DIAL to pattern b.64 Ä press WRITE
again to copy the source pattern to b.64.
In-store demo suggestion: Use b.64 as the edit “target pattern” for all of your demos!
Tweak the copied pattern:
1. Change Tempo: (see “Changing Tempo” above).
2. Force pattern Playback: As pattern plays, hold down Shift and press PLAY repeatedly, to “force” pattern playback to
first beat of the measure.
3. Tweak the pattern: Strike the part keys Ä work with the knobs and switches as pattern plays - create an edited set of
part sounds using the existing pattern
Ä try striking any part key Ä in the PART COMMON section, press Effect Ä
rotate EFFECT knob to select one of 11 effects
Ä tweak effect with Edit 1 / Edit 2 knobs. Note that you can select / edit
a new effect for each part (except Accent).
4. Try working with Pitch/Speed, EG Time, Level, Pan knobs and Roll / Amp EG switches - for different part keys, as
pattern plays.
5. Assign another waveform to a part sound: Press any part key (while pattern plays or is stopped) Ä CURSOR to
Wave (3
rd
row , PATTERN column) Ä strike the part key as you rotate DIAL to audition / select new samples Ä tweak
the part key w/ new sample assigned.
6. Tweak the pattern data itself: As pattern plays, press any Drum part key Ä press to add/remove steps from the 16
step keys (lit/unlit)
Ä to add/remove steps from the Synth parts, press the Keyboard key so it is off (unlit). There are
two accent grids: one for the synth parts and one for the drum parts
Ä press the appropriate Accent key and set new
accents on the 16 step keys (use Level knob to set overall accent level).
7. SOLO and MUTE parts: Press and hold down SOLO and press a part key (it will light) (or group of part keys). Press
SOLO again to defeat solo
Ä press and hold down PART MUTE (TAP), then press a part key (or group of part keys) to
mute/unmute parts (lit/unlit)
Ä press STOP Ä press WRITE 2x to write edited pattern to memory.
Motion Sequencing: Record knob and switch changes for each part, effects and delay
Record Motion sequences in the previous pattern:
1. Press Part 1 part key (it will light) Ä hold Shift and press step key 8 (Clear Motion) 2x, to clear previous Motion
sequence for Part 1
Ä repeat this step for each part in the pattern.
2. Press to select Part 6A key (it will light) Ä in PART edit section, press Motion Seq to select Smooth or Trig Hold (it will
light)
Ä press REC key (left of STOP). REC will light, and PLAY will flash.