Filter
Top Products
Connecting the FC-15 RGBS to Component Video Converter
3
Table 1: Front Panel FC-15 RGBS to Component Video Converter Features
# Feature Function
1 POWER Switch Illuminated switch for turning the unit ON or OFF
Table 2: Rear Panel FC-15 RGBS to Component Video Converter Features
# Feature Function
1 INPUT Scart Connector Connects to the external video source
2
TERM Hi-Z / 75 Switch Pushing in selects 75, releasing selects Hi-Z
1
3 LOOP Scart Connector Connects to the Scart video loop
4 Y OUT RCA Connector
5 B-Y OUT RCA Connector Connects to the YUV acceptor
6 R-Y OUT RCA Connector
7 12V DC +12V DC connector for powering the unit
8 RIGHT OUT RCA Connector
Right audio output
9 LEFT OUT RCA Connector Left audio output
5 Connecting the FC-15 RGBS to Component Video Converter
To connect your FC-15 RGBS to Component Video Converter, as the example
in Figure 2 illustrates, do the following
2
:
1. Connect a video source (for example, a set top box) to the Scart input
connector.
2. Connect the LOOP Scart connector (optional) to an RGB CRT monitor,
and release the Hi-Z/75 button to Hi-Z.
When the input is not looped, the Hi-Z/75 button should be pushed in.
3. Connect the Y OUT, B-Y OUT, and the R-Y OUT RCA connectors of the
FC-15 to the Y/R, Pb/Cb/G, and the Pr/Cr/B INPUT RCA connectors of
the VP-740, respectively
3
. Connect the LEFT and RIGHT OUT audio
RCA connectors to the power amplifier and speakers.
4. Connect the 12V DC power OUT socket of the VP-740 to the 12V DC
power (IN) socket of the FC-15
4
. On the VP-740, connect the AC power
cord
5
to the power connector.
1 For looping select Hi-Z
2 Switch OFF the power on each device before connecting it to your FC-15. After powering up your FC-15, switch on the
power on each device
3 Alternatively, connect the Y OUT, B-Y OUT, and the R-Y OUT RCA connectors of the FC-15 to a YUV acceptor, for
example, a plasma monitor (not shown in Figure 2)
4 Alternatively, connect (not illustrated in Figure 2) the 12V DC power adapter (wall transformer) to the 12V DC socket of
the FC-15 and connect the transformer to the mains electricity
5 We recommend that you use only the power cord that is supplied with the VP-740