VS-30FW - Using the VS 30FW FireWire 800/1394b Repeater / HUB
7
7
5 Using the VS 30FW FireWire 800/1394b
Repeater / HUB
To use the VS-30FW FireWire 800/1394b Repeater / HUB, as the example in
Figure 2 illustrates, do the following:
1. Connect up to 3 FireWire devices to up to 3 ports, for example: PORT 1 to a
video camcorder, PORT 2 to a hard drive, and PORT 3 to a computer.
Not all ports need to be connected. Any unused port should simply be left unconnected
2. Connect the 12V DC power adapter to the power socket and connect the
adapter to the mains electricity (not shown in
Figure 2).
The ON red LED lights.
3. Be sure that the power on each device is turned ON.
The ACTIVE green LED lights indicating that there is data present on a port.
Figure 2: Connecting the VS-30FW FireWire 800/1394b Repeater / HUB