Filter
Top Products
4. Interpreting LED Indicators
The following figure shows the locations of the LED indicators:
Power LED: indicates the status of the repeater power source.
State Indication Interpretation
On Normal The power of the hub is on.
Off Problem No power is being supplied to the hub.
Collision LED: indicates the collision detected by the hub. The
LED is normally off and it blinks when there are collisions on 10M
shared segment or 100M shared segment.
Link/Rx 1-8 LED: indicates the link status and receiving activities
of port #1-#8.
State Indication Interpretation
On Normal Good link and no incoming packets
(Green color: 100M link, orange color: 10M link)
Blink Normal There are receiving activities on the port.
(Green color: 100M link, orange color: 10M link)
Off Normal No active link to another device
12