Filter
Top Products
OPERATION GUIDE 31
3
Open the clips on both ends of the
DIMM socket.
4
Remove the DIMM from its package.
5
Insert the DIMM into the DIMM
socket so that the notches on the
DIMM align with the
corresponding protrusions in the
slot.
6
Close the clips on the DIMM slot
to secure the DIMM.
7
When you have finished installing the DIMM, replace the side cover and
fasten it with the screw.
Setting the Printer Driver
After you install the additional memory to the printer, follow the instructions
below to set the printer driver so that the printer can use the memories
efficiently.
1
Click the Windows Start button, and then click Printers and Faxes.
2
Right click the Kyocera Mita FS-1030D KX icon, and click Properties.
The Properties dialog box will open. Click the Device Settings tab.
3
Enter the total memory size installed to the printer (up to 288MB) in the
Memory box.