Filter
Top Products
5-8 Troubleshooting
Error Indication
If the indicators light or flash repeatedly in manners not described
above for normal or maintenance indication, a service error has
probably occurred. Turn the printer off by the power switch, wait 5
seconds and then turn the printer on again. This may clear the error.
Even if the error is not cleared, contact your service technician.
The toner is running low. Have a new toner container ready.
The toner has run out. Replace with a new toner container.
After replacing the toner container,
clean the inside of the printer.
Unable to print with the specified
resolution due to insufficient
memory.
Add the expansion memory to the
printer.
CF card is not formatted. Format the CF card.
Specified file not found. Press [GO] to continue processing.
Press [Cancel] to cancel processing.
The current printing cannot be
continued.
Press [GO] to continue processing.
Press [Cancel] to cancel processing.
Unable to print due to insufficient
memory.
Install the expansion memory in the
printer. Press [GO] to continue
processing. Press [Cancel] to cancel
processing.
Unable to print as the data is too
complicated.
Press [GO] to continue processing.
Press [Cancel] to cancel processing.
Indicator Meaning Remedy