Filter
Top Products
Model: W86111 www.lacrossetechnology.com/support pg. 2
POSITION CLOCK .................................................................................. 6
POSITION OUTDOOR SENSOR ........................................................... 7
SPECIFICATIONS ................................................................................... 7
CARE AND MAINTENANCE ................................................................... 8
WARRANTY AND SUPPORT INFORMATION ....................................... 8
FCC STATEMENT .................................................................................... 9
INITIAL SETUP
Step 1: Insert 2 new AA batteries (not included) into the
TX141v2 sensor. Observe the correct polarity. The red
LED will flash when transmitting.
Step 2: Insert 3 new AA Alkaline batteries (not included) into
the clock. Observe correct polarity.
Step 3: After 5 minutes, place the sensor outside in a shaded
location. Maximum range is 300 feet (91 meters) open air.
Note: If the outdoor Temperature area shows dashes after 3
minutes, remove the batteries and start from step 1.