Model: 616-146v2 www.lacrossetechnology.com/support Page | 4
Rotate Projection:
• Press the PROJECTION button to rotate the projection image 90
degrees.
• Press the PROJECTION button again to rotate another 90
degrees.
Change Projection Modes: Hold, then release the PROJECTION
button to switch projection modes. Watch the projection image to view
the changes.
• Time and Outdoor Temperature: alternate every 5 seconds
(default)
• Time only
• Outdoor Temperature only
USB CHARGE PORT
Charge a smart phone, camera or other devices when the forecast
station is plugged into a power outlet with the included 5V AC
adapter.
Note: This is a power-output charging port. It does not supply power
to the projection clock.
• Connect your external device’s USB charging cable (not included)
to the USB charging port.
• Charging times will vary.
• USB Power Output: 1A maximum current. Charge 1A devices or
devices that are self-regulating.
MANUAL WWVB RADIO-CONTROLLED TIME SEARCH
• Press the -/TIME button to start or stop a manual signal
search. WWVB Icon will flash
For information about WWVB visit:
www.nist.gov/pml/div688/grp40/wwvb.cfm
LOW BATTERY ICON
• If the icon is displayed in Outdoor Temperature section,
replace batteries in the outdoor sensor.
• If the icon is displayed in Indoor Temperature section,
replace batteries in the projection clock.
WWVB
Icon
Low
Battery
Icon