Filter
Top Products
2
WEATHER TENDENCY INDICATOR
Working together with the weather icons are the Weather Tendency
Indicators. When the indicator points upwards, it means that the Air-
pressure is increasing and the weather is expected to improve. When the
indicator points right the pressure is holding steady. When indicator points
downwards, the Air-pressure is falling and the weather is expected to become
worse. This is forecasting the next 12 hours in the future.
LOW BATTERY:
When this icon appears in the indoor (IN) reading section, replace the batteries
in the Digital Wall Clock.
When this icon appears in the outdoor (OUT) readings section, replace the
batteries in the outdoor transmitter.
POSITIONING THE OUTDOOR TRANSMITTER
The remote temperature transmitter should be mounted vertically to avoid damage.
Place both units in the desired shaded locations, and wait approximately 1-hour
before permanently mounting the transmitter to ensure that there is proper
reception. The outdoor temperature transmitter is water resistant, not waterproof
and should not be placed anywhere it will become submerged in water or subject to
standing water or snow.
WALL MOUNT
Choose a location for the transmitter that is within range of the Atomic Digital Wall
Clock and under an overhang for accuracy.
Option 1:
Install one mounting screw (included) into a wall leaving
approximately ½ of an inch (12.7mm) extended.
Place the transmitter onto the screw, using the hanging hole on
the backside.
Gently pull the transmitter down to lock the screw into place.
Option 2:
Insert the mounting screw through the front of the transmitter and into the wall.
Tighten the screw to snug (do not over tighten).
To achieve a true temperature reading, mount where direct sunlight cannot reach
the outdoor transmitter. Mount the outdoor transmitter on a North-facing wall or in
any well shaded area. Under an eave or deck rail work well. The maximum
transmitting range in open air is over 200-feet (60 meters). Obstacles such as
walls, windows, stucco, concrete, and large metal objects can reduce the range.
Place the transmitter at least 6 feet in the air to improve signal transmission.
POSITIONING THE CLOCK:
The Atomic Digital Wall Clock should be mounted near an exterior wall with the front
or back facing toward Ft. Collin Colorado for best WWVB reception. The Digital
Wall Clock should be six feet from other electronics or wireless devices in order to
best receive the outdoor temperature transmitter signal.
Foldout Table Stand:
A foldout table stand is located on the back of the clock.
Pull the stand out from the bottom center edge of the Digital Wall Clock,
below the battery compartment. Once the foldout table stand is
extended, place the Digital Wall Clock in an appropriate location.
Wall Mount
Use a straightedge to horizontally space three screw positions on a
wall to match the hanging holes on the back of the clock. Install three
mounting screws (not included) into a wall within transmission range—
leaving approximately 3/16 of an inch (5mm) extended from the wall.
Place the Digital Wall Clock onto the screws, using the hanging holes
on the backside.
Gently pull the Digital Wall Clock down to lock the screws into place.
Note: Always ensure that the Digital Wall Clock locks onto the screws before
releasing.
CARE AND MAINTENANCE:
Do Not Mix Old and New Batteries
Do Not Mix Alkaline, Standard, Lithium or Rechargeable Batteries
Do not expose the Digital Wall Clock to extreme temperatures, vibration or shock.
Keep Digital Wall Clock dry.
Clean Digital Wall Clock with a soft damp cloth. Do not use solvents or scouring
agents.
The Digital Wall Clock is not a toy. Keep it out of reach of children.
The Digital Wall Clock is not to be used for medical purpose or for public
information, but is determined for home use only.
The specifications of this Digital Wall Clock may change without prior notice.
Improper use or unauthorized opening of housing will void the warranty.
If the Digital Wall Clock does not work properly, change the batteries.
SPECIFICATIONS:
Indoor:
Temperature Range: +32°F to +122°F (0°C to 50°C)
Interval: About every 30 seconds
Outdoor:
Temperature Range: -40°F to 140°F (-40°C to 60°C)
Alkaline Batteries: -20°F to 140°F (-28.8°C to 60°C)
Lithium Batteries: -40°F to 140°F (-40°C to 60°C)
Temperatures below - 20°F (-28.8°C)
require Lithium batteries in the outdoor transmitter.
Distance: Over 200 ft. (60 meters) RF 433MHz (open air)
Interval: About every 30 seconds
Power:
Digital Wall Clock: 2-AA, IEC, LR6 batteries (not included)
TX141 Transmitter: 2-AA, IEC, LR6 batteries (not included)
Battery Life:
TX141 Transmitter
Battery Life: Battery life is over 24 months when using reputable
battery brands for both Alkaline and Lithium batteries
Digital Wall Clock
Battery Life: Over 12 months.
Dimensions:
Digital Wall Clock: 11” L x 1.1” W x 8.54” H (280 x 28 x 217 mm)
TX141 Transmitter: 1.58”L x 0.83” W x 5.08” H (40.13 x 21x 129 mm)
WARRANTY INFORMATION
La Crosse Technology, Ltd provides a 1-year limited warranty on this product
against manufacturing defects in materials and workmanship.
This limited warranty begins on the original date of purchase, is valid only on
products purchased and used in North America and only to the original purchaser of
this product. To receive warranty service, the purchaser must contact La Crosse
Technology, Ltd for problem determination and service procedures. Warranty
service can only be performed by a La Crosse Technology, Ltd authorized service
center. The original dated bill of sale must be presented upon request as proof of
purchase to La Crosse Technology, Ltd or La Crosse Technology, Ltd’s authorized
service center.
La Crosse Technology, Ltd will repair or replace this product, at our option and at no
charge as stipulated herein, with new or reconditioned parts or products if found to
be defective during the limited warranty period specified above. All replaced parts
and products become the property of La Crosse Technology, Ltd and must be
returned to La Crosse Technology, Ltd. Replacement parts and products assume
the remaining original warranty, or ninety (90) days, whichever is longer. La Crosse
Technology, Ltd will pay all expenses for labor and materials for all repairs covered
by this warranty. If necessary repairs are not covered by this warranty, or if a
product is examined which is not in need or repair, you will be charged for the
repairs or examination. The owner must pay any shipping charges incurred in
getting the La Crosse Technology, Ltd product to a La Crosse Technology, Ltd
authorized service center. La Crosse Technology, Ltd will pay ground return
shipping charges to the owner of the product to a USA address only.
The La Crosse Technology, Ltd warranty covers all defects in material and
workmanship with the following specified exceptions: (1) damage caused by
accident, unreasonable use or neglect (including the lack of reasonable and
necessary maintenance); (2) damage occurring during shipment (claims must be
presented to the carrier); (3) damage to, or deterioration of, any accessory or
decorative surface; (4) damage resulting from failure to follow instructions contained
in the owner’s manual; (5) damage resulting from the performance of repairs or
alterations by someone other than an authorized La Crosse Technology, Ltd
authorized service center; (6) units used for other than home use (7) applications
and uses that this product was not intended or (8) the products inability to receive a
signal due to any source of interference.. This warranty covers only actual defects
within the product itself, and does not cover the cost of installation or removal from
a fixed installation, normal set-up or adjustments, claims based on
misrepresentation by the seller or performance variations resulting from installation-
related circumstances.
LA CROSSE TECHNOLOGY, LTD WILL NOT ASSUME LIABILITY FOR
INCIDENTAL, CONSEQUENTIAL, PUNITIVE, OR OTHER SIMILAR DAMAGES
ASSOCIATED WITH THE OPERATION OR MALFUNCTION OF THIS PRODUCT.
THIS PRODUCT IS NOT TO BE USED FOR MEDICAL PURPOSES OR FOR
PUBLIC INFORMATION. THIS PRODUCT IS NOT A TOY. KEEP OUT OF
CHILDREN’S REACH.
This warranty gives you specific legal rights. You may also have other rights
specific to the State. Some States do not allow the exclusion of consequential or
incidental damages therefore the above exclusion of limitation may not apply to you.
For warranty work, technical support, or information contact:
La Crosse Technology, Ltd
2817 Losey Blvd. S.
La Crosse, WI 54601
Contact Support: 1-608-782-1610
Product Registration:
www.lacrossetechnology.com/support/register
Protected under U.S. Patents:
5,978,738
6,076,044
6,597,990
The complete instruction manual is available at:
www.lacrossetechnology.com/w86111
FCC Disclaimer:
This Device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) the device must accept any interference received, including interference that
may cause undesired operation.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV
INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS
EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER AUTHORITY TO
OPERATE THE EQUIPMENT
All rights reserved. This handbook must not be reproduced in any form, even in
excerpts, or duplicated or processed using electronic, mechanical or chemical
procedures without written permission of the publisher.
This handbook may contain mistakes and printing errors. The information in this
handbook is regularly checked and corrections made in the next issue. We accept
no liability for technical mistakes or printing errors, or their consequences.
All trademarks and patents are acknowledged.
Printed in China