Filter
Top Products
Page 5 of 12
The radio tower icon will disappear if the
signal reception is unsuccessful.
About WWVB (Atomic Time) Radio Signal
Reception:
A continuously displayed radio tower icon
indicates that the WWVB signal was received
successfully during the last attempt. If the
clock attempts to receive the WWVB signal
and is unsuccessful, the tower icon will not be
continuously displayed on the LCD.
We recommend a minimum distance of 8 feet
(2.5 meters) to all sources of interference,
such as televisions or computer monitors
Radio reception is weaker in rooms with
concrete walls (e.g.: in cellars) and in offices.
In such environments, place the system close
to the window.
Setup of Time and Display Options:
Above: Back view of Atomic Clock showing
buttons and battery compartment.
Note: The "SET" button is used to enter SET
mode. The display will exit SET mode
automatically after 10 seconds of inactivity. If the
display exits SET mode while you are following the
setup instructions, press the "SET" button the
indicated number of times to return to the portion of
the SET mode desired.
1. Set the Time Zone:
Press the “SET” button and the Time Zone
display will flash. Use the “PLUS” button to
select the correct Time Zone setting from the
available selections below:
-1,-2,-3: Other time zones
-4: ATL - Atlantic
-5: EST - Eastern (default setting)
-6: CST - Central
-7: MST - Mountain
Page 6 of 12
-8: PST - Pacific
-9: ALA - Alaska
-10,-11,-12,12,11,10,9,8,7,6,5,4,3,2,1: Other
time zones
0: - Greenwich Mean Time (GMT)
2. Set Daylight Saving Time ON/OFF:
Press the “SET” button a second time and DST
will flash. Press the "PLUS" button to toggle
Daylight Saving Time on ("On") or off ("OFF").
See "Daylight Saving Time" on page 7 for
more information.
3. Set Language:
Press the “SET” button a third time and the
Language Abbreviation will flash. Press the
"PLUS" button to switch the Language to be
displayed. The three-letter abbreviation for the
day of the week will display in the bottom of the
LCD while the setting flashes above.
US: English (default setting)
F: French (Français)
E: Spanish (Español)
d: German (Deutsch)
Note: Manual time and date settings are optional.
In most cases, the time and date will set
automatically via WWVB radio signal. If placement
for the display does not allow for WWVB reception
due to interference, you will need to set the time
and date manually.
4. Set Time Manually - Hour:
Press the “SET” button a fourth time and the
Hours digits will flash. Use the “PLUS“ button
to set the correct hour.
5. Set Time Manually - Minute:
Press the “SET” button a fifth time and the
Minutes digits will flash. Use the “PLUS“ button
to set the correct minute.
6. Set Date Manually - Year:
Press the “SET” button a sixth time and the
Year digits will flash. Use the “PLUS“ button to
set the correct year.
7. Set Date Manually - Month:
Press the “SET” button a seventh time and the
Month digits will flash. Use the “PLUS“ button
to set the correct month.
8. Set Date Manually - Date:
Press the “SET” button an eighth time and the
Date digits will flash. Use the “PLUS“ button to
set the correct date.
9. Set Date Manually - Day of Week: