La Crosse Technology WT-8005U Clock User Manual


 
Page 6 of 12
To set the Alarm Time, press and hold down
the ALARM button for 2 seconds until the hours
digits flash. Use the “” and ““buttons to set
the required hour. Press ALARM button to
confirm your setting
The Minute display of the Alarm time starts to
flash. Use the “” and ““buttons to set the
required minute. Press ALARM button to
confirm your setting and to end the setting
procedure.
To activate or deactivate the daily alarms,
briefly press the “ALARM” button once. When
the alarm is active the clock displays the “
icon after the hour. When deactivated the
alarm icon does not show.
About the Daily Alarms:
After 30 seconds without pressing any button
the clock switches automatically from setting
mode to Normal clock mode.
The alarm will sound for 2 minutes if you do not
deactivate it by pressing any button. In this
case the alarm will be repeated automatically
after 24 hours.
Rising alarm sound changes the frequency 4
times while the alarm signal is heard. This is
known as a "Crescendo Alarm".
Automatic Snooze function:
While the alarm is sounding, press the
SNOOZE button to activate the snooze
function. The “” icon appears on the display.
This operation moves the alarm back by 5
minutes and the alarm will restart at this time.
The Snooze function can be interrupted by
pressing any button.