LaCie 131081 Computer Monitor User Manual


 
LaCie 324i LCD Monitor Introduction
User Manual page 11
324
1.5. Views of the Monitor
1. Display
2. Power Indicator LED – Solid white when the power is turned
On. Blinking white when in idle or power save modes.
3. Power Button – Turns power On/Off.
4. ENTER Button:
Hot key to switch between color gamut settings sRGB, Ado-
beRGB, User, Greyscale, and Calibration. Push and release
the button to select a setting.
Press to make a selection when viewing the on-screen dis-
play (OSD).
5. Up/Down Arrows:
Up - Hot key for Brightness. While the OSD is off, press the
Up arrow to raise the display brightness. While the Bright-
ness bar is on the screen, you can also lower brightness
using the Down arrow.
Down - Hot key for Contrast. While the OSD is off, press
the Down arrow to lower the display contrast. While the
Contrast bar is on the screen, you can also raise contrast
using the Up arrow.
While in the Menu, use the Up/Down arrows to scroll
through OSD items to make settings adjustments.
1
1.5.1. Front View and Button Functions
Refer to the diagram below for the names and functions of the monitor controls.
324
5
4
6
3
7
2
6. MENU Button:
Hot key to turn Picture in Picture (PiP) On/Off. Push the but-
ton for five seconds to start/stop PiP. The OSD must be off
when using the MENU button as a hot key.
Lightly touch the MENU button to turn the OSD On/Off
The MENU button is used to make selections in the OSD.
See 4.1. OSD Navigation.
7. Input Button:
Push the Input button to scroll through the four input sourc-
es (DVI, DisplayPort, HDMI, and Component). Release the
button when you reach the preferred input. The Input set-
ting default is Auto-Detection, which will search for first live
signal (see 4.4. OSD: Others).
Scroll through two input sources when Picture-in-Picture
(PiP) is active.
1. Component is the PiP source: DVI + Component/Dis-
playPort + Component.
2. HDMI is the PiP source: DVI + HDMI/DisplayPort +
HDMI.