Filter
Top Products
4. Windows: Insert the CD-ROM and install the LaCie Ethernet Agent.
When installed, the Ethernet Agent is accessible from the system tray.
Mac: Install and run the LaCie IP Configurator Software, located on the
included CD-ROM.
5.
Windows: Open LaCie Ethernet Agent.
When your 2big Network is found, click on
“Navigate to www” to configure it.
Mac: Follow the steps indicated by the
Wizard. When your 2big Network is found,
select Connect.
6. The administration page will open in your
web browser. Enter:
Username: admin
Password: admin
Click OK and start configuring your drive.
TECHNICAL NOTE: The LaCie 2big Network is configured in Big mode. Please
see the detailed User Manual on the LaCie Storage Utilities CD-ROM if you want to
change the RAID mode to Safe mode (mirroring).
QIG_2big-Network_070723.indd 5 7/23/07 12:02:22 PM