Filter
Top Products
Setup Steps
1. Connect the power supply.
2. Connect the Ethernet cable to the Big Disk Network and to your network through
an Ethernet outlet or directly to a router, switch or hub.
3. Turn on the Big Disk Network by
moving the power switch on the back
to the ON position.
NOTE: Please allow approximately 3
minutes for the Big Disk Network to start
up and become available on the network (the
front LED will stop blinking).
4. Install LaCie Network Assistant on your
computer from the LaCie Utilities CD-ROM.
Windows users, click the Network Assistant
icon in the system tray.
Mac users, click the Network Assistant
icon in the menu bar.
Linux users, click the Network Assistant
icon in the task bar.
Power
Switch