Filter
Top Products
IAC-F848
TM2 Bus Ratio: Represents the frequency (bus ratio)'of the throttled
performance state that will be initiated when the on-die sensor gose from not hot
to hot.
TM2 Bus VID: Represents the voltage of the throttled performance state that
will be initiated when the on-die sensor gose from not hot to hot.
Limit CPUID Maxval: Enable Limit CPUID Maximum value to 3 when use older
OS like NT4. Disable CPUID Limit for windows XP.
C1E Function: Enable CPU Enhanced Halt (C1E) function. Disable CPU Enhanced
Halt (C1E) function.
Execute Disable Bit : When enabled, the processor prevents the execution of
code in data-only memory pages. This provides some protection against buffer
overflow attacks
Virtualization Technology : Enable/Disable Virtualization technology function.
Hard disk boot priority: When press enter, then will display screen as below:
Select boot sequence for onboard(or add-on cards) SCSI, RAID, etc.
Virus warning: Enable/Disable anti-virus protection by monitoring writes to the
boot sector and partition table.
Hyper-Threading Technology: Enable/Disable CPU Hyper Threading Feature.
Please note that this feature is only working for operating system with multi
processors mode supported.
Quick Power On Self Test: Setting is “Enabled”. This speeds up the Power On
Self Test (POST) by skipping some items that are normally checked during the
full POST. If your system is functioning normally, you can choose this feature to
speed up the booting process.
First / Second / Third / Other Boot Device: The BIOS attempts to load the
23