Filter
Top Products
Mechanical Time Recorder User’s Guide
Page 7
Setting Decimal Wheel with Tenths
Figure 4
Use only for recorders printing
in tenths (models with a 4
th
digit
of “2” or “5”)
1. Rotate Tenths
Wheel (0.9) Figure 4.1 until
it is set at “9”. Rotate the
Main Setting Wheel Figure
4.3 until the Tenths Wheel
moves to a “0”. (This is the
zero minute.)
2. Set the Hour Wheel
Figure 4.2 to the current
Hour.
3. Rotate the Clock Face Setting Wheel Figure 4.3 to set
the hands to match the time set on the wheels.
4. Rotate the Main Setting Wheel to advance both the
Clock Face and Print Wheels together. Rotate until you
pass the actual time by one minute (each “click”
indicates one minute.)
For example, at 10:05, rotate 5 times = 5 clicks = 5
minutes past ten o’clock.
5. Hold the corner of the Clock Face and release the
Release Latch by pushing it to the left. Slowly let the
Type Section down and press it firmly into the Type
Section Headlock.
6. Make a sample registration and verify the time and date
or day is correct.
7. Replace and lock the case cover