Filter
Top Products
Model 2121 Time Recorder User’s Guide
Page 10
Change the Ribbon
Lathem time recorders have self-reversing ribbons. With normal
use, a ribbon should last for many months or even years. When
the time comes, it is easy to change.
1. Remove cover and lift type section as described in Unlock
and Remove the Cover and Lift Type Section.
2. Use a pointed object to remove the small cotter pins that
hold the ribbon spools.
3. Lift the ribbon hold-down guide, and use a pen or a pencil to
hold it away from the ribbon, as shown above.
4. Slide off the old ribbon spools.
5. Slide on the new Lathem ribbon spools. Make sure the ribbon
feeds from the bottom of the spools and runs between the
reversing fingers. Also make sure that the red side of the
ribbon is nearest the outside of the unit.
6. Reinstall the cotter pins to hold the ribbon spools in place.
7. Remove the pen or pencil and lower the ribbon hold-down
guide.
8. Follow the instructions in
Lower the Type Section and Close
and Lock the Unit.