Filter
Top Products
Windows Hardware and
Driver Installation
1. Before opening the casing of your computer,make sure that all
power is off.
2. Locate an unused PCI slot and insert the 2SP-PCI card into it.Ensure
that it is well seated,and screw the metal bracket of the board to
your PC’s casing.
3. Locate an unused back panel in your PC’s casing (preferably one
that does not correspond to a slot) and remove the metal insert.
Screw the bracket of the second serial port of the 2SP-PCI card to
the casing in this location.If you have detached the cable from the
2SP-PCI card in order to perform this operation,be sure to re-
connect the cable with the red wire corresponding to the number 1
printed on the board.
4. Replace the machine’s cover and turn the PC on.
PCI Slot
Screw for attaching card bracket
to PC casing
Serial Port 1
1
Serial Port 2
(cable connection)
NB:Red wire
corresponds to 1
Parallel Port