6
If not using a DHCP server to assign network addresses,choose the
"Manually configure" option for Network Settings.In the
configuration screen that appears,enter the network settings you
wish for that PayLink-IP.Once the new values are entered and
accepted,the PayLink-IP will reboot to implement the new network
settings.Advanced network settings can also be accessed from this
page by clicking on the "Advanced" link.
Changing the network settings of a PayLink-IP device that is
installed on a network may make that device unavailable to other
stations that have activated a connection to that device using older
network settings.
NOTE:
The following network parameters can be configured for the LAVA
PayLink-IP/232:
Network Settings