Filter
Top Products
4
Configuration consists of the following:
B. Host configuration
C. Protocol configuration
D. Password selection
E. Upgrading software
A. Configuring network settings
Configuration
A. Configuring network settings
PayLink-IP devices installed on your network will need unique IP
addresses.These are set by using a web browser.
The factory default network settings for the PayLink-IP are:
IP address: 192.168.0.35
Subnet mask: 255.255.255.0
Gateway address: 0.0.0.0
Name: [empty]
Workgroup: [empty]
DHCP detection: disabled
To set a PayLink-IP's network settings,open a web browser and
enter the IP address of the PayLink-IP into the browser's location
bar.The embedded web server running on the PayLink-IP will
display the opening screen of the PayLink-IP.
Configuring PayLink-IP network settings