Filter
Top Products
Windows NT 4.0 Installation
Windows NT Driver Installation
1. Once the LavaPort-Quad is installed in your PC, turn on your
computer and start NT.
2. Place the LavaPort-Quad installation diskette into your floppy drive
and select Run from the Start Menu.When prompted type:
A:\NT4.0\Setup.
3. After the necessary files have been copied, select My Computer and
start Control Panel.A new icon will appear called“LavaPort”.This
applet should now be used to configure ALL Com Ports in your PC -
not just LavaPorts.
21
Note: Make sure that you are installing the correct LavaPort-Quad
drivers for the appropriate operating system.
DO NOT install drivers for other Windows versions
under Windows NT