Filter
Top Products
1. With the power turned off,insert the Quattro-PCI card into
any free PCI slot in your PC.Make sure the card is well
seated.Insert the bracket with Ports C and D into a free slot.
If you must detach the cables from the card to do so,be
sure to install the cables back onto the card with the red
wire corresponding to the“1”on the board.Turn your PC on
and start Windows.
2. Windows will automatically detect the Quattro-PCI as a
new PCI Serial Controller and ask you to insert the
Installation Diskette.The installation files are located in the
root directory of this disk.Windows XP may display a
message to the effect that the drivers are not digitally
signed.This warning can be ignored.
3. After the necessary files have been copied,Windows will
complete the full installation of the Quattro-PCI.During this
process,two Quattro-PCI parents will be created in Device
Manager under Multi-Function Adapters,and four child
ports will be created under Control Panel | System | Device
Manager | Ports.
Windows 95/98/Me/2000 Installation