Filter
Top Products
Introduction
1
Introduction
Thank you for contacting a technical support representative to obtain
information about returning your printer for warranty exchange. Follow these
instructions very carefully.
If you need additional assistance, refer to the General Information Guide
(included with the original printer) or printer.konicaminolta.com
for worldwide
sources of service and support.
Attention
Failure to follow these instructions could result in voiding your
warranty.
Exchange Procedure
Each of these steps is explained in detail in this guide.
1 Unpack the exchange printer. See page 2.
2 Prepare the original printer—turn it off, unplug the
power cord, and remove the interface cables and
media.
See page 3.
3 Move the imaging cartridge from the original printer to
the exchange printer.
See page 4.
4 Finish setting up the exchange printer—fill the tray with
media, plug it in, attach the interface cables, and turn it
on.
See page 6.
5 Repack the original printer, and call the shipper for
pickup.
See page 8.