Lenovo 0806E2U Personal Computer User Manual


 
3. Connect the cable of the new USB keyboard or mouse to one of the USB
connectors on the computer. Depending on where you want to connect the new
USB keyboard or mouse, see “Locating connectors, controls, and indicators on
the front of your computer” on page 7 or “Locating connectors and parts on
the rear of your computer” on page 8.
What to do next:
v To work with another piece of hardware, go to the appropriate section.
v To complete the replacement, go to “Completing the parts replacement.”
Completing the parts replacement
After completing the installation or replacement for all parts, you need to reinstall
the computer cover and reconnect cables.
To reinstall the computer cover and reconnect cables to your computer, do the
following:
1. Make sure that all components have been reassembled correctly and that no
tools or loose screws are left inside your computer. See “Locating components”
on page 10 for the locations of the various components in your computer.
2. If you have removed the front bezel, reinstall it. See “Removing and reinstalling
the front bezel” on page 15.
3. Properly route the cables and keep them clear of the hinges and sides of the
computer chassis to avoid interference with closing the computer cover.
Figure 31. Connecting the USB keyboard or mouse
Chapter 2. Installing or replacing hardware 37