Lenovo 0958A4U= Personal Computer User Manual


 
An option that previously worked does not work now
Symptom: An option that previously worked does not work now.
Actions:
Verify that all option hardware and cable connections are secure.
If the option comes with its own test instructions, use those instructions to test the option.
If the failing option is a SCSI option, verify that:
The cables for all external SCSI options are connected correctly.
The last option in each SCSI chain, or the end of the SCSI cable, is terminated correctly.
All external SCSI options are turned on. External SCSI options must be turned on before the computer
is turned on. For more information, see your SCSI documentation.
Verify that the option and any required device drivers are installed correctly.
If these actions do not correct the problem, run the diagnostic programs (see “Diagnostic programs” on
page 114 for instructions). If you need technical assistance, see Chapter 11 “Getting information, help, and
service” on page 117.
Performance and lockup problems
Poor performance and lockup problems can be a result of any of the following:
“Insufcient free hard disk drive space” on page 110
“Excessive number of fragmented les” on page 111
“Insufcient memory” on page 112
Make a selection from the above list to nd out more about the corrective actions you can take.
Insufcient free hard disk drive space
Symptom: Insufcient free hard disk drive space
The Windows operating system will slow down and might produce errors if the hard disk drive gets too full.
To check the amount of free space on the Windows Vista operating system and the Windows 7 operating
system, do the following:
1. Click Start Computer.
2. Right-click your C drive entry and then click Properties. The amount of free disk space is displayed.
Actions to free up disk space:
On the Windows Vista operating system, do one or all of the following:
1. Click Start Computer.
2. Right-click your C drive entry and then click Properties.
3. Click Disk Cleanup.
4. Choose My Files or Files from all users on this computer.
5. A list of unnecessary le categories is displayed. Select each le category you want to delete, and
then click OK.
6. Click Delete Files.
110 ThinkCentre User Guide