Filter
Top Products
• “Removing the WiFi card module” on page 57
• “Installing the WiFi units” on page 59
Removing the WiFi adapter card
To remove a WiFi adapter card, do the following:
1. Turn off the computer and disconnect all power cords from electrical outlets.
2. Remove the computer cover. See “Removing the computer cover” on page 34.
3. At the rear of the computer, remove the screw that secures the PCI card latch.
4. Grasp the WiFi adapter card that is currently installed and gently pull it out of the slot.
Figure 36. Removing the WiFi adapter card
Note: The card ts tightly into the card slot. If necessary, alternate moving each side of the card a
small amount until it is removed from the card slot.
Removing the WiFi card module
To remove the WiFi card module, do the following:
Chapter 5. Installing or replacing hardware 57