Lenovo 2112 Laptop User Manual


 
1. Install the solid-state drive into the storage converter. Then, install the four screws to secure the
solid-state drive to the storage converter.
Figure 41. Installing the solid-state drive into the storage converter
2. To install the solid-state drive with the storage converter into the 3.5-inch hard disk drive bracket, ex
the bracket and align pin 1 , pin 2 , pin 3 , and pin 4 on the bracket with the corresponding holes in
the storage converter.
Figure 42. Installing the solid-state drive with the storage converter into the hard disk drive bracket
3. Connect the signal cable and the power cable to the solid-state drive.
4. Install the solid-state drive into the desired hard disk drive bay. See “Replacing the primary hard disk
drive” on page 53
or “Replacing the secondary hard disk drive” on page 55.
58 ThinkCentre User Guide