Filter
Top Products
Table 31. Removal steps of LCD panel and LCD cable
1
Attention: Unplug the LCD cable with holding the left and right edges of the
connector with your fingers, and gently pull the connector toward you. DO NOT
unplug it with pulling the cable. Applying tension could cause the cable to be
damaged or a wire to be broken, and it might cause the S-driver to be damaged.
When installing:
v Place the LCD panel on a soft and clean sheet spread on a flat table, and plug
the cable by pushing the left and right edges of the connector little by little
with your fingers.
v DO NOT work by lifting the LCD panel.
v DO NOT plug the cable with one hand.
2
When installing: When attaching the LCD panel to the cover, press the left and
right edges covered with metal gently with your fingers. DO NOT press the
surface of the panel or apply any excessive force to the panel.
102 ThinkPad X301 Hardware Maintenance Manual