Filter
Top Products
1. Ensure that all components have been reassembled correctly and that no tools
or loose screws are left inside your computer.
2. Reposition any cables that might impede the replacement of the computer
cover.
3. Position the computer cover on the chassis so that the rail guides on the sides
of the cover engage the rails and push the cover to the closed position. Install
the two screws that secure the computer cover.
4. Install any locking devices such as a padlock as necessary.
5. If your computer is being placed in the vertical position, attach the floor stand.
6. Reconnect the external cables and power cords to the computer. See “Locating
the connectors on the rear of your computer” on page 2.
7. To update the configuration, see “Starting the Setup Utility” in the Quick
Reference that was included with your computer.
Note:
In most areas of the world, Lenovo requires the return of the defective CRU.
Information about this will come with the CRU or will come a few days
after the CRU arrives.
Chapter 2. Replacing hardware 13