Lenovo 389 Server User Manual


 
an increased level of manageability over the basic server management available to the system board. You
can purchase an iKVM key directly from Lenovo.
Installing the iKVM key
Attention: Do not open your server or attempt any repair before reading and understanding the “Safety information”
on page iii and “Guidelines” on page 83.
This topic provides instructions on how to install the iKVM key.
Before you begin, print all the related instructions or ensure that you can view the PDF version on another
computer for reference.
Note: Use any documentation that comes with the iKVM key and follow those instructions in addition to
the instructions in this topic.
To install the iKVM key, do the following:
1. Remove all media from the drives and turn off all attached devices and the server. Then, disconnect all
power cords from electrical outlets and disconnect all cables that are connected to the server.
2. Remove the server cover. See “Removing the server cover” on page 85.
3. Lay the server on its side for easier operation.
4. Touch the static-protective package that contains the iKVM key to any unpainted surface on the outside
of the server. Then, take the iKVM key out of the package.
106 ThinkServer Hardware Maintenance Manual